Go to Top

Cerbero

CERBERO is an automatic machine for hot stamping on coat hanger labels of up to three colours with the possibility of using one, two or three heads also with transfer.

Heads 3
Printing surface [mm] 120×80
Speed in automatic mode [pieces/hour] 4800

Foto06

The operator, once the machine has been setup, only has to fill the loading hopper and replace the box of processed pieces. Two labels are inserted simultaneously by a feeding device directly on the rotating table, where they are secured mechanically by the table, printed and automatically unloaded into a container.

The machine prints label of any shape without the need for any adjustments or changes to the setup

The working cycle is fully managed by a PLC and all the parameters can be entered via a convenient touch-screen interface that guides the operator during machine setup.

With this machine it is possible to hot stamp the transfer

The machine can be connected to our service centre via the Internet, making it possible to carry out remote diagnostics and upgrades, reducing equipment downtime due to breakdowns or maintenance.

All our machines are designed and built in accordance with the existing Directive 2006/42/EC and subsequent amendments and additions and comply with health and safety requirements.
All our machines are CE marked.

 

Show the data sheet of the machines for hanger labels:

Idra Cerbero Giano Zeus Roll 130 2 piste