The CS series is designed for hot stamping of lettering, trademarks, designs, etc. on flat and tapered surfaces of different dimensions. Combines all the features of versatility, functionality, ease of use and preparation speed that even make it possible and affordable for small batches.
|Printing surface [mm]||120×80||160×120|
|Stove stroke [mm]||350||450|
|Max passage [mm]||750||850|
The peculiarity of this series of semi-automatic machines is the ability to print particularly large objects or to print in such a position that requires vary large support.
The CS series has the ability to adjust the flatness of the oven, so as to compensate for any special tapering of the workpiece or plates.
All machines in the CS series can be inserted into an automatic production cycle as they are already set up to interface with other machines, robots, etc.
The working cycle is fully managed by a PLC and all the parameters can be entered via a convenient touch-screen interface that guides the operator during machine setup.
The machine can be connected to our service centre via the Internet, making it possible to carry out remote diagnostics and upgrades, reducing equipment downtime due to breakdowns or maintenance.
The machine structure is made entirely of steel. The electrical and pneumatic components used are from leading brands.
All our machines are designed and built in accordance with the existing Directive 2006/42/EC and subsequent amendments and additions and comply with health and safety requirements.
All our machines are CE marked.